Floor Anchors Archives - American Gymnast and Ninja https://www.american-gymnast.com/product-category/artistic-gymnastics/equipment/apparatus-accessories/floor-anchors/ Fueling the Flame Mon, 28 Jul 2025 21:55:24 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.2 https://www.american-gymnast.com/wp-content/uploads/2021/02/cropped-AG_logo_complete_tm_600x600px-32x32.jpg Floor Anchors Archives - American Gymnast and Ninja https://www.american-gymnast.com/product-category/artistic-gymnastics/equipment/apparatus-accessories/floor-anchors/ 32 32 214071398 Style E Floor Anchor – 2 7/8″ to 9″ https://www.american-gymnast.com/product/style-e-floor-anchor-2-7-8-to-9/ https://www.american-gymnast.com/product/style-e-floor-anchor-2-7-8-to-9/#respond Fri, 15 Aug 2014 20:29:42 +0000 http://wwww.american-gymnast.com/?post_type=product&p=15199 Installed in floating wood floors resting on sleepers or metal clip fasteners Features removable cap and anchoring cement Measure distance from top of floor to concrete to determine model AAI has recently completed a total redesign of the entire line of floor anchors.  Any new installation of AAI floor anchors will include this new design. [...]

The post Style E Floor Anchor – 2 7/8″ to 9″ appeared first on American Gymnast and Ninja.

]]>
  • Installed in floating wood floors resting on sleepers or metal clip fasteners
  • Features removable cap and anchoring cement
  • Measure distance from top of floor to concrete to determine model

    • AAI has recently completed a total redesign of the entire line of floor anchors.  Any new installation of AAI floor anchors will include this new design.

    • Included with all of AAI’s cabled apparatus
    • Installs into AAI’s 3/4″ threaded floor plate
    • Swivels 360 degrees
    • Retro-Fit Anchor allows compatibility between new 3/4″ tie downs and old 1/2″ in-ground anchors
    • Groove in the handle indicates retro vs. standard anchor

    AAI Anchor Upgrade Details

    Anchor System

    The new AAI floor anchor design includes all styles (B, BX , C, and E). It is our recommendation and intent that all existing floor anchors be updated to the new design as soon as possible.  For those unwilling or unable to accommodate this recommendation, a retro-fit option is also available using the new design components.

    • 49003 – Standard Swivel Anchor – Each
    • 407-135 – Standard Swivel Anchor – Set of Four
    • 49004 – Retro Fit Floor Anchor – Each
    • 407-140 – Retro Fit Floor Anchor – Set of Four

    Comgination Tie-down/Plate Unit

    These now come complete as one unit, eliminating engagement issues which allowed the plate to block the tie-down from complettely engaging the anchor.  The new, one-piece design reduces the risk o fthis mistake and creates a well-rhreaded connection.

    • (a) Assembly incorporates bushings which allow the tie-down handle and plate to move independently.  This improves the response of the entire unit and increases the product lifecycle due to a reduction in wear.
    • (b) The new design features a snap ring which holds the tie-down and plate together as one collective unit.

    Tie-Down Handle

    The tie-down itself has been redesigned, changing from the old T-Handle design to a new two-piece unit.  The new form adds strength and reduces the number of stress points that weaken over time.  AAI recommends hand-tightening only as no mechanical advantage is necessary.

    • (a) The cylindrical shape and knurled texture discourage over tightening which can lead to product failure in extreme circumstances.
    • (b) Changing the thread from 1/2″ to 3/4″ allows the tie-down to complete a more stable connection to the anchor which enhances the overall strength of the unit.

    Floor Anchor (sold separately)

    AAI’s new floor anchor designs nest more firmly into the flooring structure creating less fatigue and fewer opportunities for poor engagement or cross-threading.  The outside diameter of the anchor has been changed from 7/8″ to 1″ allowing for the 3/4″ tie-down to fully engage.

    • (a) Spring loaded plunger reduces the risk of debris from entering anchor when tie-down is disengaged.
    • (b) The new threaded texture increases the grip between anchor surface and surrounding area.

    The post Style E Floor Anchor – 2 7/8″ to 9″ appeared first on American Gymnast and Ninja.

    ]]>     https://www.american-gymnast.com/product/style-e-floor-anchor-2-7-8-to-9/feed/ 0 15199     Style E Floor Anchor – 2 7/8″ to 7″ https://www.american-gymnast.com/product/style-e-floor-anchor-2-7-8-to-7/ https://www.american-gymnast.com/product/style-e-floor-anchor-2-7-8-to-7/#respond Fri, 15 Aug 2014 20:28:35 +0000 http://wwww.american-gymnast.com/?post_type=product&p=15197 Installed in floating wood floors resting on sleepers or metal clip fasteners Features removable cap and anchoring cement Measure distance from top of floor to concrete to determine model AAI has recently completed a total redesign of the entire line of floor anchors.  Any new installation of AAI floor anchors will include this new design. [...]

    The post Style E Floor Anchor – 2 7/8″ to 7″ appeared first on American Gymnast and Ninja.

    ]]>
  • Installed in floating wood floors resting on sleepers or metal clip fasteners
  • Features removable cap and anchoring cement
  • Measure distance from top of floor to concrete to determine model

    • AAI has recently completed a total redesign of the entire line of floor anchors.  Any new installation of AAI floor anchors will include this new design.

    • Included with all of AAI’s cabled apparatus
    • Installs into AAI’s 3/4″ threaded floor plate
    • Swivels 360 degrees
    • Retro-Fit Anchor allows compatibility between new 3/4″ tie downs and old 1/2″ in-ground anchors
    • Groove in the handle indicates retro vs. standard anchor

    AAI Anchor Upgrade Details

    Anchor System

    The new AAI floor anchor design includes all styles (B, BX , C, and E). It is our recommendation and intent that all existing floor anchors be updated to the new design as soon as possible.  For those unwilling or unable to accommodate this recommendation, a retro-fit option is also available using the new design components.

    • 49003 – Standard Swivel Anchor – Each
    • 407-135 – Standard Swivel Anchor – Set of Four
    • 49004 – Retro Fit Floor Anchor – Each
    • 407-140 – Retro Fit Floor Anchor – Set of Four

    Comgination Tie-down/Plate Unit

    These now come complete as one unit, eliminating engagement issues which allowed the plate to block the tie-down from complettely engaging the anchor.  The new, one-piece design reduces the risk o fthis mistake and creates a well-rhreaded connection.

    • (a) Assembly incorporates bushings which allow the tie-down handle and plate to move independently.  This improves the response of the entire unit and increases the product lifecycle due to a reduction in wear.
    • (b) The new design features a snap ring which holds the tie-down and plate together as one collective unit.

    Tie-Down Handle

    The tie-down itself has been redesigned, changing from the old T-Handle design to a new two-piece unit.  The new form adds strength and reduces the number of stress points that weaken over time.  AAI recommends hand-tightening only as no mechanical advantage is necessary.

    • (a) The cylindrical shape and knurled texture discourage over tightening which can lead to product failure in extreme circumstances.
    • (b) Changing the thread from 1/2″ to 3/4″ allows the tie-down to complete a more stable connection to the anchor which enhances the overall strength of the unit.

    Floor Anchor (sold separately)

    AAI’s new floor anchor designs nest more firmly into the flooring structure creating less fatigue and fewer opportunities for poor engagement or cross-threading.  The outside diameter of the anchor has been changed from 7/8″ to 1″ allowing for the 3/4″ tie-down to fully engage.

    • (a) Spring loaded plunger reduces the risk of debris from entering anchor when tie-down is disengaged.
    • (b) The new threaded texture increases the grip between anchor surface and surrounding area.

    The post Style E Floor Anchor – 2 7/8″ to 7″ appeared first on American Gymnast and Ninja.

    ]]>     https://www.american-gymnast.com/product/style-e-floor-anchor-2-7-8-to-7/feed/ 0 15197     Style E Floor Anchor – 2 7/8″ to 6″ https://www.american-gymnast.com/product/style-e-floor-anchor-2-7-8-to-6/ https://www.american-gymnast.com/product/style-e-floor-anchor-2-7-8-to-6/#respond Fri, 15 Aug 2014 20:27:33 +0000 http://wwww.american-gymnast.com/?post_type=product&p=15195 Installed in floating wood floors resting on sleepers or metal clip fasteners Features removable cap and anchoring cement Measure distance from top of floor to concrete to determine model AAI has recently completed a total redesign of the entire line of floor anchors.  Any new installation of AAI floor anchors will include this new design. [...]

    The post Style E Floor Anchor – 2 7/8″ to 6″ appeared first on American Gymnast and Ninja.

    ]]>
  • Installed in floating wood floors resting on sleepers or metal clip fasteners
  • Features removable cap and anchoring cement
  • Measure distance from top of floor to concrete to determine model

    • AAI has recently completed a total redesign of the entire line of floor anchors.  Any new installation of AAI floor anchors will include this new design.

    • Included with all of AAI’s cabled apparatus
    • Installs into AAI’s 3/4″ threaded floor plate
    • Swivels 360 degrees
    • Retro-Fit Anchor allows compatibility between new 3/4″ tie downs and old 1/2″ in-ground anchors
    • Groove in the handle indicates retro vs. standard anchor

    AAI Anchor Upgrade Details

    Anchor System

    The new AAI floor anchor design includes all styles (B, BX , C, and E). It is our recommendation and intent that all existing floor anchors be updated to the new design as soon as possible.  For those unwilling or unable to accommodate this recommendation, a retro-fit option is also available using the new design components.

    • 49003 – Standard Swivel Anchor – Each
    • 407-135 – Standard Swivel Anchor – Set of Four
    • 49004 – Retro Fit Floor Anchor – Each
    • 407-140 – Retro Fit Floor Anchor – Set of Four

    Comgination Tie-down/Plate Unit

    These now come complete as one unit, eliminating engagement issues which allowed the plate to block the tie-down from complettely engaging the anchor.  The new, one-piece design reduces the risk o fthis mistake and creates a well-rhreaded connection.

    • (a) Assembly incorporates bushings which allow the tie-down handle and plate to move independently.  This improves the response of the entire unit and increases the product lifecycle due to a reduction in wear.
    • (b) The new design features a snap ring which holds the tie-down and plate together as one collective unit.

    Tie-Down Handle

    The tie-down itself has been redesigned, changing from the old T-Handle design to a new two-piece unit.  The new form adds strength and reduces the number of stress points that weaken over time.  AAI recommends hand-tightening only as no mechanical advantage is necessary.

    • (a) The cylindrical shape and knurled texture discourage over tightening which can lead to product failure in extreme circumstances.
    • (b) Changing the thread from 1/2″ to 3/4″ allows the tie-down to complete a more stable connection to the anchor which enhances the overall strength of the unit.

    Floor Anchor (sold separately)

    AAI’s new floor anchor designs nest more firmly into the flooring structure creating less fatigue and fewer opportunities for poor engagement or cross-threading.  The outside diameter of the anchor has been changed from 7/8″ to 1″ allowing for the 3/4″ tie-down to fully engage.

    • (a) Spring loaded plunger reduces the risk of debris from entering anchor when tie-down is disengaged.
    • (b) The new threaded texture increases the grip between anchor surface and surrounding area.

    The post Style E Floor Anchor – 2 7/8″ to 6″ appeared first on American Gymnast and Ninja.

    ]]>     https://www.american-gymnast.com/product/style-e-floor-anchor-2-7-8-to-6/feed/ 0 15195     Style E Floor Anchor – 2 7/8″ to 5″ https://www.american-gymnast.com/product/style-e-floor-anchor-2-7-8-to-5/ https://www.american-gymnast.com/product/style-e-floor-anchor-2-7-8-to-5/#respond Fri, 15 Aug 2014 20:26:29 +0000 http://wwww.american-gymnast.com/?post_type=product&p=15193 Installed in floating wood floors resting on sleepers or metal clip fasteners Features removable cap and anchoring cement Measure distance from top of floor to concrete to determine model AAI has recently completed a total redesign of the entire line of floor anchors.  Any new installation of AAI floor anchors will include this new design. [...]

    The post Style E Floor Anchor – 2 7/8″ to 5″ appeared first on American Gymnast and Ninja.

    ]]>
  • Installed in floating wood floors resting on sleepers or metal clip fasteners
  • Features removable cap and anchoring cement
  • Measure distance from top of floor to concrete to determine model

    • AAI has recently completed a total redesign of the entire line of floor anchors.  Any new installation of AAI floor anchors will include this new design.

    • Included with all of AAI’s cabled apparatus
    • Installs into AAI’s 3/4″ threaded floor plate
    • Swivels 360 degrees
    • Retro-Fit Anchor allows compatibility between new 3/4″ tie downs and old 1/2″ in-ground anchors
    • Groove in the handle indicates retro vs. standard anchor

    AAI Anchor Upgrade Details

    Anchor System

    The new AAI floor anchor design includes all styles (B, BX , C, and E). It is our recommendation and intent that all existing floor anchors be updated to the new design as soon as possible.  For those unwilling or unable to accommodate this recommendation, a retro-fit option is also available using the new design components.

    • 49003 – Standard Swivel Anchor – Each
    • 407-135 – Standard Swivel Anchor – Set of Four
    • 49004 – Retro Fit Floor Anchor – Each
    • 407-140 – Retro Fit Floor Anchor – Set of Four

    Comgination Tie-down/Plate Unit

    These now come complete as one unit, eliminating engagement issues which allowed the plate to block the tie-down from complettely engaging the anchor.  The new, one-piece design reduces the risk o fthis mistake and creates a well-rhreaded connection.

    • (a) Assembly incorporates bushings which allow the tie-down handle and plate to move independently.  This improves the response of the entire unit and increases the product lifecycle due to a reduction in wear.
    • (b) The new design features a snap ring which holds the tie-down and plate together as one collective unit.

    Tie-Down Handle

    The tie-down itself has been redesigned, changing from the old T-Handle design to a new two-piece unit.  The new form adds strength and reduces the number of stress points that weaken over time.  AAI recommends hand-tightening only as no mechanical advantage is necessary.

    • (a) The cylindrical shape and knurled texture discourage over tightening which can lead to product failure in extreme circumstances.
    • (b) Changing the thread from 1/2″ to 3/4″ allows the tie-down to complete a more stable connection to the anchor which enhances the overall strength of the unit.

    Floor Anchor (sold separately)

    AAI’s new floor anchor designs nest more firmly into the flooring structure creating less fatigue and fewer opportunities for poor engagement or cross-threading.  The outside diameter of the anchor has been changed from 7/8″ to 1″ allowing for the 3/4″ tie-down to fully engage.

    • (a) Spring loaded plunger reduces the risk of debris from entering anchor when tie-down is disengaged.
    • (b) The new threaded texture increases the grip between anchor surface and surrounding area.

    The post Style E Floor Anchor – 2 7/8″ to 5″ appeared first on American Gymnast and Ninja.

    ]]>     https://www.american-gymnast.com/product/style-e-floor-anchor-2-7-8-to-5/feed/ 0 15193     Style E Floor Anchor – 2 7/8″ to 4″ https://www.american-gymnast.com/product/style-e-floor-anchor-2-7-8-to-4/ https://www.american-gymnast.com/product/style-e-floor-anchor-2-7-8-to-4/#respond Fri, 15 Aug 2014 20:25:40 +0000 http://wwww.american-gymnast.com/?post_type=product&p=15191 Installed in floating wood floors resting on sleepers or metal clip fasteners Features removable cap and anchoring cement Measure distance from top of floor to concrete to determine model AAI has recently completed a total redesign of the entire line of floor anchors.  Any new installation of AAI floor anchors will include this new design. [...]

    The post Style E Floor Anchor – 2 7/8″ to 4″ appeared first on American Gymnast and Ninja.

    ]]>
  • Installed in floating wood floors resting on sleepers or metal clip fasteners
  • Features removable cap and anchoring cement
  • Measure distance from top of floor to concrete to determine model

    • AAI has recently completed a total redesign of the entire line of floor anchors.  Any new installation of AAI floor anchors will include this new design.

    • Included with all of AAI’s cabled apparatus
    • Installs into AAI’s 3/4″ threaded floor plate
    • Swivels 360 degrees
    • Retro-Fit Anchor allows compatibility between new 3/4″ tie downs and old 1/2″ in-ground anchors
    • Groove in the handle indicates retro vs. standard anchor

    AAI Anchor Upgrade Details

    Anchor System

    The new AAI floor anchor design includes all styles (B, BX , C, and E). It is our recommendation and intent that all existing floor anchors be updated to the new design as soon as possible.  For those unwilling or unable to accommodate this recommendation, a retro-fit option is also available using the new design components.

    • 49003 – Standard Swivel Anchor – Each
    • 407-135 – Standard Swivel Anchor – Set of Four
    • 49004 – Retro Fit Floor Anchor – Each
    • 407-140 – Retro Fit Floor Anchor – Set of Four

    Comgination Tie-down/Plate Unit

    These now come complete as one unit, eliminating engagement issues which allowed the plate to block the tie-down from complettely engaging the anchor.  The new, one-piece design reduces the risk o fthis mistake and creates a well-rhreaded connection.

    • (a) Assembly incorporates bushings which allow the tie-down handle and plate to move independently.  This improves the response of the entire unit and increases the product lifecycle due to a reduction in wear.
    • (b) The new design features a snap ring which holds the tie-down and plate together as one collective unit.

    Tie-Down Handle

    The tie-down itself has been redesigned, changing from the old T-Handle design to a new two-piece unit.  The new form adds strength and reduces the number of stress points that weaken over time.  AAI recommends hand-tightening only as no mechanical advantage is necessary.

    • (a) The cylindrical shape and knurled texture discourage over tightening which can lead to product failure in extreme circumstances.
    • (b) Changing the thread from 1/2″ to 3/4″ allows the tie-down to complete a more stable connection to the anchor which enhances the overall strength of the unit.

    Floor Anchor (sold separately)

    AAI’s new floor anchor designs nest more firmly into the flooring structure creating less fatigue and fewer opportunities for poor engagement or cross-threading.  The outside diameter of the anchor has been changed from 7/8″ to 1″ allowing for the 3/4″ tie-down to fully engage.

    • (a) Spring loaded plunger reduces the risk of debris from entering anchor when tie-down is disengaged.
    • (b) The new threaded texture increases the grip between anchor surface and surrounding area.

    The post Style E Floor Anchor – 2 7/8″ to 4″ appeared first on American Gymnast and Ninja.

    ]]>     https://www.american-gymnast.com/product/style-e-floor-anchor-2-7-8-to-4/feed/ 0 15191     Style E Floor Anchor – less than 2 7/8″ https://www.american-gymnast.com/product/style-e-floor-anchor-less-than-2-7-8/ https://www.american-gymnast.com/product/style-e-floor-anchor-less-than-2-7-8/#respond Fri, 15 Aug 2014 20:21:21 +0000 http://wwww.american-gymnast.com/?post_type=product&p=15189 Installed in floating wood floors resting on sleepers or metal clip fasteners Features removable cap and anchoring cement Measure distance from top of floor to concrete to determine model AAI has recently completed a total redesign of the entire line of floor anchors.  Any new installation of AAI floor anchors will include this new design. [...]

    The post Style E Floor Anchor – less than 2 7/8″ appeared first on American Gymnast and Ninja.

    ]]>
  • Installed in floating wood floors resting on sleepers or metal clip fasteners
  • Features removable cap and anchoring cement
  • Measure distance from top of floor to concrete to determine model

    • AAI has recently completed a total redesign of the entire line of floor anchors.  Any new installation of AAI floor anchors will include this new design.

    • Included with all of AAI’s cabled apparatus
    • Installs into AAI’s 3/4″ threaded floor plate
    • Swivels 360 degrees
    • Retro-Fit Anchor allows compatibility between new 3/4″ tie downs and old 1/2″ in-ground anchors
    • Groove in the handle indicates retro vs. standard anchor

    AAI Anchor Upgrade Details

    Anchor System

    The new AAI floor anchor design includes all styles (B, BX , C, and E). It is our recommendation and intent that all existing floor anchors be updated to the new design as soon as possible.  For those unwilling or unable to accommodate this recommendation, a retro-fit option is also available using the new design components.

    • 49003 – Standard Swivel Anchor – Each
    • 407-135 – Standard Swivel Anchor – Set of Four
    • 49004 – Retro Fit Floor Anchor – Each
    • 407-140 – Retro Fit Floor Anchor – Set of Four

    Comgination Tie-down/Plate Unit

    These now come complete as one unit, eliminating engagement issues which allowed the plate to block the tie-down from complettely engaging the anchor.  The new, one-piece design reduces the risk o fthis mistake and creates a well-rhreaded connection.

    • (a) Assembly incorporates bushings which allow the tie-down handle and plate to move independently.  This improves the response of the entire unit and increases the product lifecycle due to a reduction in wear.
    • (b) The new design features a snap ring which holds the tie-down and plate together as one collective unit.

    Tie-Down Handle

    The tie-down itself has been redesigned, changing from the old T-Handle design to a new two-piece unit.  The new form adds strength and reduces the number of stress points that weaken over time.  AAI recommends hand-tightening only as no mechanical advantage is necessary.

    • (a) The cylindrical shape and knurled texture discourage over tightening which can lead to product failure in extreme circumstances.
    • (b) Changing the thread from 1/2″ to 3/4″ allows the tie-down to complete a more stable connection to the anchor which enhances the overall strength of the unit.

    Floor Anchor (sold separately)

    AAI’s new floor anchor designs nest more firmly into the flooring structure creating less fatigue and fewer opportunities for poor engagement or cross-threading.  The outside diameter of the anchor has been changed from 7/8″ to 1″ allowing for the 3/4″ tie-down to fully engage.

    • (a) Spring loaded plunger reduces the risk of debris from entering anchor when tie-down is disengaged.
    • (b) The new threaded texture increases the grip between anchor surface and surrounding area.

    The post Style E Floor Anchor – less than 2 7/8″ appeared first on American Gymnast and Ninja.

    ]]>     https://www.american-gymnast.com/product/style-e-floor-anchor-less-than-2-7-8/feed/ 0 15189     Style BX Floor Anchor https://www.american-gymnast.com/product/style-bx-floor-anchor/ https://www.american-gymnast.com/product/style-bx-floor-anchor/#respond Fri, 15 Aug 2014 20:16:10 +0000 http://wwww.american-gymnast.com/?post_type=product&p=15187 Same features as model 422-121 with longer knurled anchor - 3 1/4’’ (81mm) Includes anchoring cement AAI has recently completed a total redesign of the entire line of floor anchors.  Any new installation of AAI floor anchors will include this new design. Included with all of AAI's cabled apparatus Installs into AAI's 3/4" threaded floor [...]

    The post Style BX Floor Anchor appeared first on American Gymnast and Ninja.

    ]]>
  • Same features as model 422-121 with longer knurled anchor – 3 1/4’’ (81mm)
  • Includes anchoring cement

    • AAI has recently completed a total redesign of the entire line of floor anchors.  Any new installation of AAI floor anchors will include this new design.

    • Included with all of AAI’s cabled apparatus
    • Installs into AAI’s 3/4″ threaded floor plate
    • Swivels 360 degrees
    • Retro-Fit Anchor allows compatibility between new 3/4″ tie downs and old 1/2″ in-ground anchors
    • Groove in the handle indicates retro vs. standard anchor

    AAI Anchor Upgrade Details

    Anchor System

    The new AAI floor anchor design includes all styles (B, BX , C, and E). It is our recommendation and intent that all existing floor anchors be updated to the new design as soon as possible.  For those unwilling or unable to accommodate this recommendation, a retro-fit option is also available using the new design components.

    • 49003 – Standard Swivel Anchor – Each
    • 407-135 – Standard Swivel Anchor – Set of Four
    • 49004 – Retro Fit Floor Anchor – Each
    • 407-140 – Retro Fit Floor Anchor – Set of Four

    Comgination Tie-down/Plate Unit

    These now come complete as one unit, eliminating engagement issues which allowed the plate to block the tie-down from complettely engaging the anchor.  The new, one-piece design reduces the risk o fthis mistake and creates a well-rhreaded connection.

    • (a) Assembly incorporates bushings which allow the tie-down handle and plate to move independently.  This improves the response of the entire unit and increases the product lifecycle due to a reduction in wear.
    • (b) The new design features a snap ring which holds the tie-down and plate together as one collective unit.

    Tie-Down Handle

    The tie-down itself has been redesigned, changing from the old T-Handle design to a new two-piece unit.  The new form adds strength and reduces the number of stress points that weaken over time.  AAI recommends hand-tightening only as no mechanical advantage is necessary.

    • (a) The cylindrical shape and knurled texture discourage over tightening which can lead to product failure in extreme circumstances.
    • (b) Changing the thread from 1/2″ to 3/4″ allows the tie-down to complete a more stable connection to the anchor which enhances the overall strength of the unit.

    Floor Anchor (sold separately)

    AAI’s new floor anchor designs nest more firmly into the flooring structure creating less fatigue and fewer opportunities for poor engagement or cross-threading.  The outside diameter of the anchor has been changed from 7/8″ to 1″ allowing for the 3/4″ tie-down to fully engage.

    • (a) Spring loaded plunger reduces the risk of debris from entering anchor when tie-down is disengaged.
    • (b) The new threaded texture increases the grip between anchor surface and surrounding area.

    The post Style BX Floor Anchor appeared first on American Gymnast and Ninja.

    ]]>     https://www.american-gymnast.com/product/style-bx-floor-anchor/feed/ 0 15187     Style B Floor Anchor https://www.american-gymnast.com/product/style-b-floor-anchor/ https://www.american-gymnast.com/product/style-b-floor-anchor/#respond Fri, 15 Aug 2014 20:14:45 +0000 http://wwww.american-gymnast.com/?post_type=product&p=15185 Installed in securely anchored wood floors Replaceable spring-loaded pop-up cap Includes anchoring cement AAI has recently completed a total redesign of the entire line of floor anchors.  Any new installation of AAI floor anchors will include this new design. Included with all of AAI's cabled apparatus Installs into AAI's 3/4" threaded floor plate Swivels 360 [...]

    The post Style B Floor Anchor appeared first on American Gymnast and Ninja.

    ]]>
  • Installed in securely anchored wood floors
  • Replaceable spring-loaded pop-up cap
  • Includes anchoring cement

    • AAI has recently completed a total redesign of the entire line of floor anchors.  Any new installation of AAI floor anchors will include this new design.

    • Included with all of AAI’s cabled apparatus
    • Installs into AAI’s 3/4″ threaded floor plate
    • Swivels 360 degrees
    • Retro-Fit Anchor allows compatibility between new 3/4″ tie downs and old 1/2″ in-ground anchors
    • Groove in the handle indicates retro vs. standard anchor

    AAI Anchor Upgrade Details

    Anchor System

    The new AAI floor anchor design includes all styles (B, BX , C, and E). It is our recommendation and intent that all existing floor anchors be updated to the new design as soon as possible.  For those unwilling or unable to accommodate this recommendation, a retro-fit option is also available using the new design components.

    • 49003 – Standard Swivel Anchor – Each
    • 407-135 – Standard Swivel Anchor – Set of Four
    • 49004 – Retro Fit Floor Anchor – Each
    • 407-140 – Retro Fit Floor Anchor – Set of Four

    Comgination Tie-down/Plate Unit

    These now come complete as one unit, eliminating engagement issues which allowed the plate to block the tie-down from complettely engaging the anchor.  The new, one-piece design reduces the risk o fthis mistake and creates a well-rhreaded connection.

    • (a) Assembly incorporates bushings which allow the tie-down handle and plate to move independently.  This improves the response of the entire unit and increases the product lifecycle due to a reduction in wear.
    • (b) The new design features a snap ring which holds the tie-down and plate together as one collective unit.

    Tie-Down Handle

    The tie-down itself has been redesigned, changing from the old T-Handle design to a new two-piece unit.  The new form adds strength and reduces the number of stress points that weaken over time.  AAI recommends hand-tightening only as no mechanical advantage is necessary.

    • (a) The cylindrical shape and knurled texture discourage over tightening which can lead to product failure in extreme circumstances.
    • (b) Changing the thread from 1/2″ to 3/4″ allows the tie-down to complete a more stable connection to the anchor which enhances the overall strength of the unit.

    Floor Anchor (sold separately)

    AAI’s new floor anchor designs nest more firmly into the flooring structure creating less fatigue and fewer opportunities for poor engagement or cross-threading.  The outside diameter of the anchor has been changed from 7/8″ to 1″ allowing for the 3/4″ tie-down to fully engage.

    • (a) Spring loaded plunger reduces the risk of debris from entering anchor when tie-down is disengaged.
    • (b) The new threaded texture increases the grip between anchor surface and surrounding area.

    The post Style B Floor Anchor appeared first on American Gymnast and Ninja.

    ]]>     https://www.american-gymnast.com/product/style-b-floor-anchor/feed/ 0 15185     Style C Floor Anchor https://www.american-gymnast.com/product/style-c-floor-anchor/ https://www.american-gymnast.com/product/style-c-floor-anchor/#respond Fri, 15 Aug 2014 20:07:41 +0000 http://wwww.american-gymnast.com/?post_type=product&p=15183 Installed in concrete and vinyl covered concrete floors Replaceable spring-loaded pop-up cap Includes anchoring cement AAI has recently completed a total redesign of the entire line of floor anchors.  Any new installation of AAI floor anchors will include this new design. Included with all of AAI's cabled apparatus Installs into AAI's 3/4" threaded floor plate [...]

    The post Style C Floor Anchor appeared first on American Gymnast and Ninja.

    ]]>
  • Installed in concrete and vinyl covered concrete floors
  • Replaceable spring-loaded pop-up cap
  • Includes anchoring cement

    • AAI has recently completed a total redesign of the entire line of floor anchors.  Any new installation of AAI floor anchors will include this new design.

    • Included with all of AAI’s cabled apparatus
    • Installs into AAI’s 3/4″ threaded floor plate
    • Swivels 360 degrees
    • Retro-Fit Anchor allows compatibility between new 3/4″ tie downs and old 1/2″ in-ground anchors
    • Groove in the handle indicates retro vs. standard anchor

    AAI Anchor Upgrade Details

    Anchor System

    The new AAI floor anchor design includes all styles (B, BX , C, and E). It is our recommendation and intent that all existing floor anchors be updated to the new design as soon as possible.  For those unwilling or unable to accommodate this recommendation, a retro-fit option is also available using the new design components.

    • 49003 – Standard Swivel Anchor – Each
    • 407-135 – Standard Swivel Anchor – Set of Four
    • 49004 – Retro Fit Floor Anchor – Each
    • 407-140 – Retro Fit Floor Anchor – Set of Four

    Comgination Tie-down/Plate Unit

    These now come complete as one unit, eliminating engagement issues which allowed the plate to block the tie-down from complettely engaging the anchor.  The new, one-piece design reduces the risk o fthis mistake and creates a well-rhreaded connection.

    • (a) Assembly incorporates bushings which allow the tie-down handle and plate to move independently.  This improves the response of the entire unit and increases the product lifecycle due to a reduction in wear.
    • (b) The new design features a snap ring which holds the tie-down and plate together as one collective unit.

    Tie-Down Handle

    The tie-down itself has been redesigned, changing from the old T-Handle design to a new two-piece unit.  The new form adds strength and reduces the number of stress points that weaken over time.  AAI recommends hand-tightening only as no mechanical advantage is necessary.

    • (a) The cylindrical shape and knurled texture discourage over tightening which can lead to product failure in extreme circumstances.
    • (b) Changing the thread from 1/2″ to 3/4″ allows the tie-down to complete a more stable connection to the anchor which enhances the overall strength of the unit.

    Floor Anchor (sold separately)

    AAI’s new floor anchor designs nest more firmly into the flooring structure creating less fatigue and fewer opportunities for poor engagement or cross-threading.  The outside diameter of the anchor has been changed from 7/8″ to 1″ allowing for the 3/4″ tie-down to fully engage.

    • (a) Spring loaded plunger reduces the risk of debris from entering anchor when tie-down is disengaged.
    • (b) The new threaded texture increases the grip between anchor surface and surrounding area.

    The post Style C Floor Anchor appeared first on American Gymnast and Ninja.

    ]]>     https://www.american-gymnast.com/product/style-c-floor-anchor/feed/ 0 15183     Retro Fit Swivel Anchor – Set of 4 https://www.american-gymnast.com/product/retro-fit-swivel-anchor-set-of-4/ https://www.american-gymnast.com/product/retro-fit-swivel-anchor-set-of-4/#respond Fri, 15 Aug 2014 20:01:53 +0000 http://wwww.american-gymnast.com/?post_type=product&p=15181 The Retro Fit allows compatibility between new 3/4” tie downs and old 1/2” in-ground anchors AAI has recently completed a total redesign of the entire line of floor anchors.  Any new installation of AAI floor anchors will include this new design. Included with all of AAI's cabled apparatus Installs into AAI's 3/4" threaded floor plate [...]

    The post Retro Fit Swivel Anchor – Set of 4 appeared first on American Gymnast and Ninja.

    ]]>     The Retro Fit allows compatibility between new 3/4” tie downs and old 1/2” in-ground anchors

    AAI has recently completed a total redesign of the entire line of floor anchors.  Any new installation of AAI floor anchors will include this new design.

    • Included with all of AAI’s cabled apparatus
    • Installs into AAI’s 3/4″ threaded floor plate
    • Swivels 360 degrees
    • Retro-Fit Anchor allows compatibility between new 3/4″ tie downs and old 1/2″ in-ground anchors
    • Groove in the handle indicates retro vs. standard anchor

    AAI Anchor Upgrade Details

    Anchor System

    The new AAI floor anchor design includes all styles (B, BX , C, and E). It is our recommendation and intent that all existing floor anchors be updated to the new design as soon as possible.  For those unwilling or unable to accommodate this recommendation, a retro-fit option is also available using the new design components.

    • 49003 – Standard Swivel Anchor – Each
    • 407-135 – Standard Swivel Anchor – Set of Four
    • 49004 – Retro Fit Floor Anchor – Each
    • 407-140 – Retro Fit Floor Anchor – Set of Four

    Comgination Tie-down/Plate Unit

    These now come complete as one unit, eliminating engagement issues which allowed the plate to block the tie-down from complettely engaging the anchor.  The new, one-piece design reduces the risk o fthis mistake and creates a well-rhreaded connection.

    • (a) Assembly incorporates bushings which allow the tie-down handle and plate to move independently.  This improves the response of the entire unit and increases the product lifecycle due to a reduction in wear.
    • (b) The new design features a snap ring which holds the tie-down and plate together as one collective unit.

    Tie-Down Handle

    The tie-down itself has been redesigned, changing from the old T-Handle design to a new two-piece unit.  The new form adds strength and reduces the number of stress points that weaken over time.  AAI recommends hand-tightening only as no mechanical advantage is necessary.

    • (a) The cylindrical shape and knurled texture discourage over tightening which can lead to product failure in extreme circumstances.
    • (b) Changing the thread from 1/2″ to 3/4″ allows the tie-down to complete a more stable connection to the anchor which enhances the overall strength of the unit.

    Floor Anchor (sold separately)

    AAI’s new floor anchor designs nest more firmly into the flooring structure creating less fatigue and fewer opportunities for poor engagement or cross-threading.  The outside diameter of the anchor has been changed from 7/8″ to 1″ allowing for the 3/4″ tie-down to fully engage.

    • (a) Spring loaded plunger reduces the risk of debris from entering anchor when tie-down is disengaged.
    • (b) The new threaded texture increases the grip between anchor surface and surrounding area.

    The post Retro Fit Swivel Anchor – Set of 4 appeared first on American Gymnast and Ninja.

    ]]>     https://www.american-gymnast.com/product/retro-fit-swivel-anchor-set-of-4/feed/ 0 15181