Uneven Bar Cable Tightener
Introducing the innovation in cable tighteners: effortless adjustability and enhanced tension! Say goodbye to the hassles of uneven bar adjustments and hello to ease and convenience with the CamLock Cable Tightener. With an improved CamLock handle design that makes adjustments simple and secure, a must-have for coaches, athletes, and facility owners.

Cable Tightener Characteristics

Adjustability
New CamLock tightening mechanism makes adjustments simpler, and eliminates overtightening, which then reduces wear on the cables and other internal parts. With a user-friendly design, you’ll spend less time adjusting and more time perfecting routines.

Enhanced Cable Tension
Our CamLock tightener ensures that cable tension is consistently optimized, providing a secure and dependable structure for gymnasts to perfect their skills.

Compatibility
Installing the cable tightener is simple, and is compatible with all AAI Uneven Bar systems. Integrate them to your existing set-up! Can be purchased individually or as a set of 4.

Learn More About Our Cable Tighteners
Crafted with durability top of mind, this tightener can withstand the demands of daily gymnastics training and competitions. Upgrade your uneven bars with the latest cable-tightening technology and experience the difference!

Weight 4 lbs

Product Numbers
407-187 (One)
407-142 (Set of Four)

The post CamLock Cable Tightener appeared first on American Gymnast and Ninja.

• Black
• Blue
• Charcoal
• Green
• Light Gray
• Orange
• Red
• Teal
• Pink
• Purple

42′ Long x 2″ Wide Boundary Hook Velcro Roll – used to mark the out of bounds lines on the floor exercise

• White

The post Hook Velcro Roll – 42′ long appeared first on American Gymnast and Ninja.

• Includes one ring tower stabilizer with two base clamps
• Use in conjunction with (407-361) ELITE Freestanding Leg Package
• Floor space dimensions – 22’ 10’’ x 26’ 11’’

The post DEMO ELITE Freestanding Ring Tower Adapter appeared first on American Gymnast and Ninja.

• Includes one horizontal bar stabilizer with two base clamps and four cable assemblies
• Use in conjunction with (407-361) ELITE Freestanding Leg Package
• Floor space dimensions – 22’ 10’’ x 26’ 8’’

The post DEMO ELITE Freestanding Horizontal Bar Adapter appeared first on American Gymnast and Ninja.

Using gravity and body weight, the Inversion Cuffs are an amazing conditioning tool best utilized by intermediate to advanced athletes. Try hooking them to a lower stall bar for a sit up station, or use a higher bar and incline for more challenging progressions. For the “all out” super-star athlete, hang fully suspended for a full body, power workout.

Tumbl Trak has designed the Inversion Cuffs to include a good amount of padding, just where needed; and adjustable Velcro straps provide a snug, but comfortable fit. Also, to prevent or minimize damage to the rail or bar, Inversion Cuffs include light padding at the point of hooking onto the bar.

Always use the inversion cuffs under the supervision of a trained professional and be mindful of proper safety practices with any inverted positions.

Are the Inversion Cuffs only for advanced athletes?
While there are a lot of great exercises advanced athletes can do with Inversion Cuffs, they are not only for them. There are many different ways to use the cuffs which would also be helpful for the beginner athletes.
What do you do with Inversion Cuffs?
Inversion Cuffs are ideal for working on conditioning. There are many drills to work on core strength as well as leg strength which the video will show you.
Will Inversion Cuffs damage my bar if I use them on my competition unevens?
The inversion cuffs are well padded along the inside of the hook and should not damage your bar. Inspect the inversion cuffs regularly to be sure the padding is in place. Also note, the inversion cuffs are NOT meant for swinging which is both dangerous and would cause damage to the bar.
What is the ankle size range for the Inversion Cuffs?
The inversion cuffs come with fully adjustable Velcro.
Can Inversion Cuffs be used with socks?
It is not recommended the inversion cuffs be used with socks as it may cause more slippage.
What do you recommend is a safe number of reps to do with cuffs on?
Carefully monitor all activity performed with the inversion cuffs. Various athletes will be capable of different numbers of reps for various drills.
What is the weight limit for the Inversion Cuffs?
The suggested weight limit for the Inversion Cuffs is 200 pounds.

The post Inversion Cuffs appeared first on American Gymnast and Ninja.

The post Universal Spotting Platform appeared first on American Gymnast and Ninja.

AAI has recently completed a total redesign of the entire line of floor anchors.  Any new installation of AAI floor anchors will include this new design.

• Included with all of AAI’s cabled apparatus
• Installs into AAI’s 3/4″ threaded floor plate
• Swivels 360 degrees
• Retro-Fit Anchor allows compatibility between new 3/4″ tie downs and old 1/2″ in-ground anchors
• Groove in the handle indicates retro vs. standard anchor

AAI Anchor Upgrade Details

Anchor System

The new AAI floor anchor design includes all styles (B, BX , C, and E). It is our recommendation and intent that all existing floor anchors be updated to the new design as soon as possible.  For those unwilling or unable to accommodate this recommendation, a retro-fit option is also available using the new design components.

• 49003 – Standard Swivel Anchor – Each
• 407-135 – Standard Swivel Anchor – Set of Four
• 49004 – Retro Fit Floor Anchor – Each
• 407-140 – Retro Fit Floor Anchor – Set of Four

Comgination Tie-down/Plate Unit

These now come complete as one unit, eliminating engagement issues which allowed the plate to block the tie-down from complettely engaging the anchor.  The new, one-piece design reduces the risk o fthis mistake and creates a well-rhreaded connection.

• (a) Assembly incorporates bushings which allow the tie-down handle and plate to move independently.  This improves the response of the entire unit and increases the product lifecycle due to a reduction in wear.
• (b) The new design features a snap ring which holds the tie-down and plate together as one collective unit.

Tie-Down Handle

The tie-down itself has been redesigned, changing from the old T-Handle design to a new two-piece unit.  The new form adds strength and reduces the number of stress points that weaken over time.  AAI recommends hand-tightening only as no mechanical advantage is necessary.

• (a) The cylindrical shape and knurled texture discourage over tightening which can lead to product failure in extreme circumstances.
• (b) Changing the thread from 1/2″ to 3/4″ allows the tie-down to complete a more stable connection to the anchor which enhances the overall strength of the unit.

Floor Anchor (sold separately)

AAI’s new floor anchor designs nest more firmly into the flooring structure creating less fatigue and fewer opportunities for poor engagement or cross-threading.  The outside diameter of the anchor has been changed from 7/8″ to 1″ allowing for the 3/4″ tie-down to fully engage.

• (a) Spring loaded plunger reduces the risk of debris from entering anchor when tie-down is disengaged.
• (b) The new threaded texture increases the grip between anchor surface and surrounding area.

The post Style E Floor Anchor – 2 7/8″ to 9″ appeared first on American Gymnast and Ninja.

AAI has recently completed a total redesign of the entire line of floor anchors.  Any new installation of AAI floor anchors will include this new design.

• Included with all of AAI’s cabled apparatus
• Installs into AAI’s 3/4″ threaded floor plate
• Swivels 360 degrees
• Retro-Fit Anchor allows compatibility between new 3/4″ tie downs and old 1/2″ in-ground anchors
• Groove in the handle indicates retro vs. standard anchor

AAI Anchor Upgrade Details

Anchor System

The new AAI floor anchor design includes all styles (B, BX , C, and E). It is our recommendation and intent that all existing floor anchors be updated to the new design as soon as possible.  For those unwilling or unable to accommodate this recommendation, a retro-fit option is also available using the new design components.

• 49003 – Standard Swivel Anchor – Each
• 407-135 – Standard Swivel Anchor – Set of Four
• 49004 – Retro Fit Floor Anchor – Each
• 407-140 – Retro Fit Floor Anchor – Set of Four

Comgination Tie-down/Plate Unit

These now come complete as one unit, eliminating engagement issues which allowed the plate to block the tie-down from complettely engaging the anchor.  The new, one-piece design reduces the risk o fthis mistake and creates a well-rhreaded connection.

• (a) Assembly incorporates bushings which allow the tie-down handle and plate to move independently.  This improves the response of the entire unit and increases the product lifecycle due to a reduction in wear.
• (b) The new design features a snap ring which holds the tie-down and plate together as one collective unit.

Tie-Down Handle

The tie-down itself has been redesigned, changing from the old T-Handle design to a new two-piece unit.  The new form adds strength and reduces the number of stress points that weaken over time.  AAI recommends hand-tightening only as no mechanical advantage is necessary.

• (a) The cylindrical shape and knurled texture discourage over tightening which can lead to product failure in extreme circumstances.
• (b) Changing the thread from 1/2″ to 3/4″ allows the tie-down to complete a more stable connection to the anchor which enhances the overall strength of the unit.

Floor Anchor (sold separately)

AAI’s new floor anchor designs nest more firmly into the flooring structure creating less fatigue and fewer opportunities for poor engagement or cross-threading.  The outside diameter of the anchor has been changed from 7/8″ to 1″ allowing for the 3/4″ tie-down to fully engage.

• (a) Spring loaded plunger reduces the risk of debris from entering anchor when tie-down is disengaged.
• (b) The new threaded texture increases the grip between anchor surface and surrounding area.

The post Style E Floor Anchor – 2 7/8″ to 7″ appeared first on American Gymnast and Ninja.

AAI has recently completed a total redesign of the entire line of floor anchors.  Any new installation of AAI floor anchors will include this new design.

• Included with all of AAI’s cabled apparatus
• Installs into AAI’s 3/4″ threaded floor plate
• Swivels 360 degrees
• Retro-Fit Anchor allows compatibility between new 3/4″ tie downs and old 1/2″ in-ground anchors
• Groove in the handle indicates retro vs. standard anchor

AAI Anchor Upgrade Details

Anchor System

The new AAI floor anchor design includes all styles (B, BX , C, and E). It is our recommendation and intent that all existing floor anchors be updated to the new design as soon as possible.  For those unwilling or unable to accommodate this recommendation, a retro-fit option is also available using the new design components.

• 49003 – Standard Swivel Anchor – Each
• 407-135 – Standard Swivel Anchor – Set of Four
• 49004 – Retro Fit Floor Anchor – Each
• 407-140 – Retro Fit Floor Anchor – Set of Four

Comgination Tie-down/Plate Unit

These now come complete as one unit, eliminating engagement issues which allowed the plate to block the tie-down from complettely engaging the anchor.  The new, one-piece design reduces the risk o fthis mistake and creates a well-rhreaded connection.

• (a) Assembly incorporates bushings which allow the tie-down handle and plate to move independently.  This improves the response of the entire unit and increases the product lifecycle due to a reduction in wear.
• (b) The new design features a snap ring which holds the tie-down and plate together as one collective unit.

Tie-Down Handle

The tie-down itself has been redesigned, changing from the old T-Handle design to a new two-piece unit.  The new form adds strength and reduces the number of stress points that weaken over time.  AAI recommends hand-tightening only as no mechanical advantage is necessary.

• (a) The cylindrical shape and knurled texture discourage over tightening which can lead to product failure in extreme circumstances.
• (b) Changing the thread from 1/2″ to 3/4″ allows the tie-down to complete a more stable connection to the anchor which enhances the overall strength of the unit.

Floor Anchor (sold separately)

AAI’s new floor anchor designs nest more firmly into the flooring structure creating less fatigue and fewer opportunities for poor engagement or cross-threading.  The outside diameter of the anchor has been changed from 7/8″ to 1″ allowing for the 3/4″ tie-down to fully engage.

• (a) Spring loaded plunger reduces the risk of debris from entering anchor when tie-down is disengaged.
• (b) The new threaded texture increases the grip between anchor surface and surrounding area.

The post Style E Floor Anchor – 2 7/8″ to 6″ appeared first on American Gymnast and Ninja.

AAI has recently completed a total redesign of the entire line of floor anchors.  Any new installation of AAI floor anchors will include this new design.

• Included with all of AAI’s cabled apparatus
• Installs into AAI’s 3/4″ threaded floor plate
• Swivels 360 degrees
• Retro-Fit Anchor allows compatibility between new 3/4″ tie downs and old 1/2″ in-ground anchors
• Groove in the handle indicates retro vs. standard anchor

AAI Anchor Upgrade Details

Anchor System

The new AAI floor anchor design includes all styles (B, BX , C, and E). It is our recommendation and intent that all existing floor anchors be updated to the new design as soon as possible.  For those unwilling or unable to accommodate this recommendation, a retro-fit option is also available using the new design components.

• 49003 – Standard Swivel Anchor – Each
• 407-135 – Standard Swivel Anchor – Set of Four
• 49004 – Retro Fit Floor Anchor – Each
• 407-140 – Retro Fit Floor Anchor – Set of Four

Comgination Tie-down/Plate Unit

These now come complete as one unit, eliminating engagement issues which allowed the plate to block the tie-down from complettely engaging the anchor.  The new, one-piece design reduces the risk o fthis mistake and creates a well-rhreaded connection.

• (a) Assembly incorporates bushings which allow the tie-down handle and plate to move independently.  This improves the response of the entire unit and increases the product lifecycle due to a reduction in wear.
• (b) The new design features a snap ring which holds the tie-down and plate together as one collective unit.

Tie-Down Handle

The tie-down itself has been redesigned, changing from the old T-Handle design to a new two-piece unit.  The new form adds strength and reduces the number of stress points that weaken over time.  AAI recommends hand-tightening only as no mechanical advantage is necessary.

• (a) The cylindrical shape and knurled texture discourage over tightening which can lead to product failure in extreme circumstances.
• (b) Changing the thread from 1/2″ to 3/4″ allows the tie-down to complete a more stable connection to the anchor which enhances the overall strength of the unit.

Floor Anchor (sold separately)

AAI’s new floor anchor designs nest more firmly into the flooring structure creating less fatigue and fewer opportunities for poor engagement or cross-threading.  The outside diameter of the anchor has been changed from 7/8″ to 1″ allowing for the 3/4″ tie-down to fully engage.

• (a) Spring loaded plunger reduces the risk of debris from entering anchor when tie-down is disengaged.
• (b) The new threaded texture increases the grip between anchor surface and surrounding area.

The post Style E Floor Anchor – 2 7/8″ to 5″ appeared first on American Gymnast and Ninja.