Introducing the one-of-a-kind AAI EVO-Elite Power Vault Table – where precision meets performance. Embark on a new era of gymnastics excellence with AAI’s NEW competition vault table. It’s precisely engineered for elite performance – providing the perfect rebound during vault skills. This apparatus is set to revolutionize the gymnastics vault market.

Featuring meticulous craftsmanship from our engineers, the AAI EVO-Elite Power Vault Table goes beyond the ordinary, offering superior grip, unparalleled versatility, and more. The precision in design ensures not just a piece of equipment but a performance partner that will elevate your vault skills to new heights. Inspire athletes in your gym, set a new standard, and reach the pinnacle of gymnastics achievement with the AAI EVO-Elite Power Vault Table.

DIMENSIONS

• The EVO-Elite Power Vault Table base measures 46 inches by 36 ½ inches and weighs 315 lbs.
• Base and Attachment Piston – 240 lbs.
• Vaulting Surface – 75 lbs.

Characteristics

This vault table will redefine the standard for performance and innovation. Precisely engineered with the athlete top of mind, ensuring they receive the perfect grip and “pop” rebound that is critical during vault skills.

Precise Engineering

Say goodbye to uncertainties, as every vault attempt is met with the exact response athletes expect – empowering them to push their boundaries.
The EVO-Elite Power Vault Table was engineered with the assistance of a retired Olympic gymnast, who helped provide feedback and create the perfect feel athletes want and expect during vaulting. This table maximizes deflection, lowering the impact force on athletes’ wrists when contacting the table. With a lower impact force and higher deflection than our previous vault table, it delivers a softer feel, reducing athlete injuries and allowing for more repetitions during training sessions.

Grip and Surface

Experience superior grip with the texture of your choice for the vault top – suede or TAC/10. The TAC/10 material is a composite leather that gives incredible grip and less slipping, while suede provides a good balance between traction and comfort. The outer edges of the vault top are covered in a breathable scuba material that permits air to escape during rebound, which then delivers a better ‘pop’ performance for the athlete.

Versatile

The new EVO-Elite Power Vault top fits on our existing vault base, making it simple to swap out your old vault top to the latest and greatest – EVO-Elite Power Vault.  Enhance the performance of your gym without needing extensive modifications or new equipment. Our user-friendly design ensures hassle-free installation, minimizing downtime in your gym.

Durability

Compete with confidence on the EVO-Elite Power Vault Table. Every component is optimized to ensure a seamless blend of strength, flexibility, and durability creating a vault table that exceeds the rigorous demands of gymnastics training and competition.

Adjustment Heights

This vault table has the same adjustments as the EVO®-Elite Vault Table. Offering a broad range of heights, beginning at 95 cm, and rising as high as 135 cm. Ensuring athletes can achieve optimal performance at their ideal height.

• Lowest:  95cm
• 100 cm
• 105 cm
• 110 cm
• 115 cm
• 120cm
• 125cm
• 130cm
• Highest: 135 cm

AAI EVO-ELITE Power Vault Table

• Bringing “Power” into your vaults without the sting of the past.
• Provide your athletes with the best possible training environment using the EVO-Elite Power Vault Table.
• The Rebound Revolution: AAI’s EVO-Elite Power Vault Table takes the impact not the athletes.
• Achieve greater heights and perform more dynamic vaults with confidence using AAI’s EVO-Elite Power Vault Table.
• Train longer and vault smarter with AAI’s EVO-Elite Power Vault Table.
• Increased rebound by 30% compared to our current model.

Additional Product Information from Engineering

Our Engineering team has done extensive FIG testing on multiple rounds of prototypes to maximize three variables in the response from the table. Those variables are rebound, deflection, and impact force.

Rebound – This maybe the most important improvement from our previous table. The rebound of the table has been dialed in near to the maximum allowable amount by FIG regulations. The improved rebound will help athletes get more force back from the table in response when they hit it. Our testing shows a 30% increase in rebound compared to our current FIG table.
Deflection and Impact Force – These two variables go somewhat hand in hand, maximizing deflection lowers the impact force on athletes’ wrists when contacting the table. This table has a lower impact force and higher deflection from our old FIG table. This translates to a softer feel and less injuries to the athletes, as well as more possible repetitions in a training session.

The technology implemented to achieve these advancements is a combination of a spring foam block configuration, multi-layer fiberglass, fiberglass flexion, a breathable cover, and softer top foam.

The post EVO-ELITE POWER VAULT TABLE appeared first on American Gymnast and Ninja.

• • • Built-in transportation system and column padding included
    • Simple gas spring height adjustment from 100 to 140 cm in 5 cm increments
    • Improved resilience and stability
    • For training and competition use
    • Used at 2016 Rio Olympics
    • FIG APPROVED

     

The post Ergojet Vaulting Table appeared first on American Gymnast and Ninja.

The post T-Trainer Package 2 appeared first on American Gymnast and Ninja.

The NEW T-Trainer can help train skills for vault, tumbling AND bars. The top surface is made with our Xtreme bed material and measures the same as a vault table, (3ft x 4ft). Your athletes will love this bouncy vault top for Yurchenko’s, Tsuk’s, Handsprings and more.

Place the T-Trainer in front of the vault as a springboard or use it at a bar station to improve circling, handstand, or seat bouncing drills. The removable Suede Cover (sold separately), attaches by Velcro to the top, making it look and feel more like a traditional vault top. Even with the suede cover, the surface is a lot softer for the wrists and shoulders, which helps to reduce overuse injuries.

The post T-Trainer appeared first on American Gymnast and Ninja.

The post T-Trainer Package 1 appeared first on American Gymnast and Ninja.

As the latest innovation to our time-tested line of gymnastics equipment, the Infinity ELITE International Vault Table offers the superior stability and ease-of-use that athletes and coaches deserve.

• FIG Approved
• Meets USAG, NCAA, and NFHS competition specifications
• New CFS Base now included with all Vault Tables
• Height adjusts from 37-½” to 53″ (950 to 1350mm) to meet FIG specifications
• Formfitting cover of 120 gauge suede-like material provides a non-slip feel
• Non-marking rubber floor contacts, four with adjustable leveling feet
• Includes 1-½” protective upright padding

407-528 ELITE International Vault Head Only (Call to Order)

About the CFS Vault Base

Gymnastic technology engineered by AAI. At AAI, the latest technology comes standard in each piece of world-class equipment. Our newest innovation is the CFS Vault Base. Adjusting the vault table has never been easier. Included with all Vault Tables Meets FIG, USAG, NCAA, and NFHS competition specifications Constant Force Springs (CFS) allow for smooth and effortless height adjustment in 5cm increments between 95 and 135cm Nylatron® GS guide buttons use a low coefficient of friction allowing the vault head to glide into position without shifting or dragging The chromed piston provides a consistent and durable surface Four non-marking rubber floor contacts with adjustable leveling feet

ASSEMBLY INSTRUCTIONS:

In this gymnastics equipment video from American Gymnast, we show you how to set up your AAI Elite Vault Table from start to finish

Your Vault Table should arrive in 3 packages:

• #407528, 407543, 407552 Infinity Vault Surface (Qty. 1)
• #407546 CFS Vault Base (Qty. 1)
• #0074860 Parts Bag (Qty. 1)

You will need a 9/16” wrench or socket for assembly

1. Remove all parts from the packing containers.
2. Refer to the illustration on the previous page and the drawing on this page for help in assembly.
3. Place the Infinity Base (item 2) on a hard, flat, level surface.
4. Place the FIG Infinity Surface (item 1) on the base as show in the illustration.
5. Align the holes. The parts bag should include eight 3/8-16 bolts, eight 3/8 lock washers and eight 3/8 washers. Place a lock washer and then the standard washer on each of the 3/8-16 bolts insert through the slot into the surface and tighten using the 9/16 wrench.
6. Turn the Spinlock (larger smooth handle) to the left to loosen.
7. Pull the Snaplock (smaller smooth handle) out. If it is difficult to pull the Snaplock out, push down while pulling out. Adjust the unit up and down by putting and equal amount of force on the Snaplock and the handle on the opposite side. When trying to raise the unit do not exert an excessive amount of force. Allow the constant force springs to assist you. You cannot raise it any faster than the springs will allow.
8. The Snaplock will make an audible click when it is engaged in a hole.
9. Tighten the Spinlock securely by turning to the right.
10. Leveling the Vault Surface can be done by adjusting the Foot Pads. There is an adjustable Foot Pads on each corner of the base.

The FIG Vaulting Table is designed for use in men’s or women’s vaulting events. The height of this vaulting surface can be adjusted in 50mm increments, from 950mm (37-3/8”) to 1350mm (53-1/8”). To adjust the height of the vaulting surface, loosen the spinlock, release the snaplock and raise or lower the vaulting surface to the desired height. The height is shown through the window on the base.

The post EVO-ELITE™ Suede Vault Table with Club Pads appeared first on American Gymnast and Ninja.

• Constant force springs allow for smooth and effortless height adjustment in 5cm increments between 95 and 135cm
• Nylatron® GS guide buttons use a low coefficient of friction allowing the vault head to glide into position without shifting or dragging

The post CFS Vault Base appeared first on American Gymnast and Ninja.

• Official Vault Table of NCAA Women’s Gymnastics Championships
• Official Vault Table of USAG J.O. National Championships
• Meets, USAG, NCAA, NFHS, and AAU competition specifications
• Reactive foam offers improved rebound and a more forgiving surface
• New CFS Base design allows for effortless height adjustment
• Height adjusts from 37 1/2 ” to 53″ (950 to 1350 mm) in 50mm increments
• Body is constructed from a fiberglass form, layered with rebounding foam
• Exclusive TAC/10 cover for incredible grip
• Comes with protective club pads for center post
• Four non-marking rubber floor contacts with adjustable leveling feet
• Surface can be easily cleaned with TAC/10 Cleaner

About the CFS Vault Base

Gymnastic technology engineered by AAI. At AAI, the latest technology comes standard in each piece of world-class equipment. Our newest innovation is the CFS Vault Base. Adjusting the vault table has never been easier. Included with all Vault Tables Meets FIG, USAG, NCAA, and NFHS competition specifications Constant Force Springs (CFS) allow for smooth and effortless height adjustment in 5cm increments between 95 and 135cm Nylatron® GS guide buttons use a low coefficient of friction allowing the vault head to glide into position without shifting or dragging The chromed piston provides a consistent and durable surface Four non-marking rubber floor contacts with adjustable leveling feet

The post TAC/10 LZT Vault Table appeared first on American Gymnast and Ninja.

• Reactive foam offers improved rebound and a more forgiving surface
• Vault surface exceeds the FIG allowable rebound by 40% while meeting the requirements for deflection and max force
• Surface can be easily cleaned with TAC/10 Cleaner

The post TAC / 10 LZT Vault Head Only appeared first on American Gymnast and Ninja.

As the latest innovation to our time-tested line of gymnastics equipment, the Infinity ELITE International Vault Table offers the superior stability and ease-of-use that athletes and coaches deserve.

• FIG Approved
• Meets USAG, NCAA, and NFHS competition specifications
• New CFS Base now included with all Vault Tables
• Height adjusts from 37-½” to 53″ (950 to 1350mm) to meet FIG specifications
• Formfitting cover of 120 gauge suede-like material provides a non-slip feel
• Non-marking rubber floor contacts, four with adjustable leveling feet
• Includes 1-½” protective upright padding

407-528 ELITE International Vault Head Only (Call to Order)

About the CFS Vault Base

Gymnastic technology engineered by AAI. At AAI, the latest technology comes standard in each piece of world-class equipment. Our newest innovation is the CFS Vault Base. Adjusting the vault table has never been easier. Included with all Vault Tables Meets FIG, USAG, NCAA, and NFHS competition specifications Constant Force Springs (CFS) allow for smooth and effortless height adjustment in 5cm increments between 95 and 135cm Nylatron® GS guide buttons use a low coefficient of friction allowing the vault head to glide into position without shifting or dragging The chromed piston provides a consistent and durable surface Four non-marking rubber floor contacts with adjustable leveling feet

ASSEMBLY INSTRUCTIONS:

In this gymnastics equipment video from American Gymnast, we show you how to set up your AAI Elite Vault Table from start to finish

Your Vault Table should arrive in 3 packages:

• #407528, 407543, 407552 Infinity Vault Surface (Qty. 1)
• #407546 CFS Vault Base (Qty. 1)
• #0074860 Parts Bag (Qty. 1)

You will need a 9/16” wrench or socket for assembly

1. Remove all parts from the packing containers.
2. Refer to the illustration on the previous page and the drawing on this page for help in assembly.
3. Place the Infinity Base (item 2) on a hard, flat, level surface.
4. Place the FIG Infinity Surface (item 1) on the base as show in the illustration.
5. Align the holes. The parts bag should include eight 3/8-16 bolts, eight 3/8 lock washers and eight 3/8 washers. Place a lock washer and then the standard washer on each of the 3/8-16 bolts insert through the slot into the surface and tighten using the 9/16 wrench.
6. Turn the Spinlock (larger smooth handle) to the left to loosen.
7. Pull the Snaplock (smaller smooth handle) out. If it is difficult to pull the Snaplock out, push down while pulling out. Adjust the unit up and down by putting and equal amount of force on the Snaplock and the handle on the opposite side. When trying to raise the unit do not exert an excessive amount of force. Allow the constant force springs to assist you. You cannot raise it any faster than the springs will allow.
8. The Snaplock will make an audible click when it is engaged in a hole.
9. Tighten the Spinlock securely by turning to the right.
10. Leveling the Vault Surface can be done by adjusting the Foot Pads. There is an adjustable Foot Pads on each corner of the base.

The FIG Vaulting Table is designed for use in men’s or women’s vaulting events. The height of this vaulting surface can be adjusted in 50mm increments, from 950mm (37-3/8”) to 1350mm (53-1/8”). To adjust the height of the vaulting surface, loosen the spinlock, release the snaplock and raise or lower the vaulting surface to the desired height. The height is shown through the window on the base.

The post ELITE International Vault Table with Fitted Pads appeared first on American Gymnast and Ninja.